1983 911SC Rear Panel Fuse Block Install

[TYARBS]

My Front Panel installation went very smoothly and everything works as it should!!  I do have a question regarding the Rear Panel Install.  On page 9 of your installation instructions, you indicate a possible wire link may be needed on a 3.2 Carrera?  I noticed on my 3.0SC there is a copper bridge from 3-2, where the retrofit panel shows the three white lines.  I believe I do NOT need to add the wire link on my 3.0, correct?

 

I am VERY pleased with your product.  Thanks for the GREAT quality.

 

Thank you,  

Tom Yarbrough

Longmont, Colorado

[Jonny Retrofit]

Thanks for the comments.

Correct, the white lines indicate an internal bridge on our panel effectively replicating the copper bridge.  Wire not needed on SC.