Jump to content

Richard Schoegler

Members
  • Content Count

    1
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. When installed the new blower only runs on one speed which is high on the high slide position (white wire), no low and no medium. As Jonny suggested, I have pulled the slide control panel from the car and thoroughly tested each wire for continuity. That test was positive for each wire. I cleaned all terminals for each slide position and the ground and have now bench tested the original blower first using newly purchased 6 pin plugs and receptacles with new wiring from the slide control panel to the old blower using the battery for 12v power in accordance with the factory wiring diagram. The or
×
×
  • Create New...