Jump to content

Moose

Members
  • Posts

    2
  • Joined

  • Last visited

Moose's Achievements

Newbie

Newbie (1/14)

  • First Post
  • Conversation Starter

Recent Badges

0

Reputation

  1. Thank you for the detailed reply. I will check wattage and connectors. I really appreciate the tech advice.
  2. I have your fuse panel ver 1.3 installed up front on my 87 911. The previous owner may have upgraded the headlamp bulbs. The low beam (dipped) circuit (position 1 & 2 to the left of the H and headlamp relays) keep blowing their 7.5 amp fuses. My Porsche mechanic insists on replacing the 7.5 fuses with 15 amp fuses for those two positions. Is the purpose of the "H" lead to correct this situation? If I run a lead from the battery to the H position, will I be able to drop back down the the proper "8amp Max" fuses at position 1 & 2? I've read your documentation on the H position but it doesn't explain if this is a way to mitigate blown fuses on the low beam circuit. Final question...what ga wire should be used from the battery to the H lead? Thank you.
×
×
  • Create New...